Center Side Break Switch – SR16200

Robust & Reliable

The SR16200 is a simple design using only the best available materials.

Solid extruded aluminum terminals, extruded aluminum blades, stainless steel pivot shaft, extruded aluminium pivot housing.

All parts are fabricated from extruded aluminum or machined from solid billet materials, such as 304 stainless steel and hard drawn copper.

NO CASTINGS

PDF DATASHEET
sr16200-3d-new
2-chantier-sr16200

Technical features

  • High strength hot dip galvanized steel base;
  • Maintenance-free dry lubricant bearings;
  • Hardware on live parts are made of non-magnetic materials;
  • Current-carrying parts are made of high-conductivity extruded aluminum;
  • Contacts are made of silver plated hard drawn copper;
  • Solid silver inlay contacts may also be provided as an option.
3-partie-active-3d

Current-carrying parts

  • All current transfers are based on our proven rotating contact with multiple spring-loaded fingers.
  • The same contacts are used at the jaw and hinges. These contact components are also used on our folding vertical break and semi-pantograph switches.
  • The blades are made of high-conductivity heat treated extruded aluminum.
4-v-center-break-3d

Optional configuration

  • The SR16200 is available in V configuration.
5-dimensions-sr16200

Dimensions & Technical Data

  • Dimensions based on ANSI TR insulators and up to 2 500A.
  • For V configuration consult factory.
  • For 3 000 to 4 000A, consult factory.
En (kV)385272.5123145170245
BIL (kV)2002503505506507509001 050
A6507501 0301 4501 7002 0002 3502 750
B7358351 1611 5421 7711 9942 5822 887
C8509501 2301 6501 9802 2802 6303 030
D4575597621 1431 3721 5752 0322 337
In (A)up to 4000up to 40001 200 to 4 0001 200 to 40001 200 to 40001 200 to 40001 200 to 40001 200 to 4000
Icc (kA peak)up to 163up to 163up to 163up to 163up to 163up to 163up to 163up to 163
Icc (kA rms)up to 63up to 63up to 63up to 63up to 63up to 63up to 63up to 63

For other ratings consult factory

Options
  • Parallel or perpendicular grounding switch
  • Manual or motor operator
  • Mechanical, electromagnetic, electrical and trapped key interlock system
  • Arcing horns
  • Silver inlays or silver plating

This brochure provides a brief introduction. EMSPEC reserves the right to make changes at any time, without notice.

Start typing and press Enter to search